Monday, August 19, 2013

How to install Ubuntu

In this article we are going to install Ubuntu. You can install Ubuntu form any medium like DVD, pen drive, network. It's up to you which medium you choose. In this article we are starting from first screen which you will interact after system boot with Ubuntu image media.
Select language from left pane and click on Install Ubuntu
ubuntu installation install ubuntu
Wizard will ask you to check available disk space, power supply and internet connectivity. Minimum 4.4 GB disk space is required to install Ubuntu. If you are installing Ubuntu on Laptop without adaptor plugged in supply make sure it has full battery backup. Ubuntu try to install updates during the installation so connect it with internet. You can update it after installation also. If you want to update Ubuntu after installation does not check mark on download updates while installing and on install this third party software.
ubuntu installation preparing to install
Installation wizard will scan the hard disk. Depending on what it detects it will show partition options. Something else options allow us to create partition manually. Select something else
ubuntu installation installation type
If its new hard disk you need to create partition table before creating partition. This only requires if hard disk does not have partition table. Select Hard disk and click on new partition table
ubuntu installation partition screen
Click on continue to partition table message
ubuntu installation partition screen new partition table message
You will get free space option once partition table is created. Select free space and click on Add
ubuntu installation partition screen total free space
In a typical Linux installation 3 partitions [/, boot, home] are required. First create / partition by selecting it from mount point.
ubuntu installation create partition root
From partition table select free space and click on Add again
ubuntu installation partition screen after root partition
select /boot from mount point drop down.
ubuntu installation create partition boot
Select free space again and click on Add. This time select /home from drop down
ubuntu installation create partition home
Now we would create swap area. Swap area work as a temporary location to support RAM.
Select free space and click on Add. This time click on Use as drop down and select swap area
ubuntu installation create partition swap select
We have created necessary partitions. Click on install now
ubuntu installation partition screen with all partition
Now wizard will format the partitions. After format you need to select time zone location
ubuntu installation select location
Now select keyboard layout
ubuntu installation detect keyboard
root account is by default disable in Ubuntu so you have create at least one account. Fill user, password and computer name. Please note that password you entered here would also be used to run su or sudo commands.
ubuntu installation user info
That's all information wizard need from you. Now just relax and wait.
ubuntu installation after all setting running
Once installation is completed wizard will prompt for reboot. Click on reboot now
ubuntu installation complete message
After reboot you will get Ubuntu login screen.
ubuntu installation login screen

How to make Ubuntu bootable USB

Ubuntu is a most flexible and widely used Linux flavor. In this article I will show you how to make Ubuntu bootable USB disk.
From this bootable USB you can install Ubuntu on any computer / Laptop / Notebook which recognize USB as a boot device.
There are several methods to create bootable USB disk but in this article I will use most easy method.
To make Ubuntu bootable USB disk we need
  • Ubuntu ISO image (You can download IOS image from Ubuntu's official site [ http://www.ubuntu.com/download/desktop ] in case you do not have it.)
  • Download YUMI Setup (You can check and download the latest version from developer's site. http://www.pendrivelinux.com/yumi-multiboot-usb-creator/)
  • USB drive with minimum 1 GB space.(Make sure you do not have any data in it. It would be format).
Attach USB drive with system and open My computer. Note down the USB drive latter
yumi drive latter
Double click on YUMI setup file

Accept the license agreement
yumi license agreement
Now we are on main configuration screen of wizard
yumi default screen

  • Select USB Drive
  • Select Format drive
  • Select Ubuntu version
  • Browse and select IOS image file of Ubuntu
  • Click on create
yumi config file
Click on Yes to confirm the action
yumi usb format confirmation
Now wizard will format the pen drive and transfer the IOS image.
yumi copying
Click on next to finish the process
yumi finish
YUMI allow you to add multiple OS. We do not want to add any additional OS. Click on No
yumi add more message
YUMI has taken all necessary actions. Close the main configuration screen
yumi default screen
Remove the USB drive from system. This USB drive is now Ubuntu bootable. Use it to install Ubuntu on any computer which support USB boot device.
Attach this bootable USB drive and select removable device / USB as first boot device from boot menu.
yumi boot menu usb selected
Click on Install Ubuntu on hard disk.
yumi install on hard disk screen
We are on first screen of installation process.
yumi setup fileubuntu installation install ubuntu
From here you can install Ubuntu. For installation steps of Ubuntu check our article

Friday, August 16, 2013

How to install Ubuntu on virtual box

In this tutorial we would install Ubuntu on window. Ubuntu is the most popular Linux. You can install Ubuntu in virtual box to use it with window system. For this article we are using window 7 as base operating system but the process would be same for other window operating systems like XP, window 8 etc.
For this article we assume that you have
  • Window operating system
  • IOS image of Ubuntu (Download from here http://www.ubuntu.com/download/desktop)
  • Virtual box software (Download from here https://www.virtualbox.org/wiki/Downloads)

How to install Virtual box in window

Double click on virtual box software
virtual box setup file
Set up file will launch set up wizard. On welcome window click on next
virtual box setup wizard welcome
Select the dentition folder where you want to install virtual box software. Default location is C:/virtualbox. You can change it if needed.
virtual box setup select options
Select the features which you want and click on next.
virtual box setup select options
Remove check mark if you do not want to create short cut on desktop otherwise click on next
virtual box setup create short cut
Wizard will reset the network interface so if you are download / uploading / have running task on internet or network, finish that first and invoke this wizard again. If you do not have any associated task with network click on yes
virtual box setup network interface warning
Click on install
virtual box ready to install
Wait for few minutes
virtual box installing
In few minutes wizard would finish the installation process. Click on finish
virtual box installation complete

How to create virtual machine

We have installed the virtual box software. Now we would create a virtual machine. Click on new button
virtual box main screen
Select Ubuntu from type and version drop down. And fill the name of virtual machine in name field
virtual machine select type
Set the RAM size for virtual machine. If you have 1GB RAM and do not set this more than 512 MB, For 2GB physical RAM do not exceed this value more than 1 GB.
virtual machine memory
Select Create a virtual hard disk now and click on next
virtual machine hard disk
keep default hard disk file type and click on next
virtual machine hard disk type
select fixed size and click on next
virtual machine hard disk size
Select the location where you want to store the virtual hard disk. Make sure selected dentition have equivalent or more free space than the size of virtual hard disk. For example if you have set 8 GB size of virtual hard disk than you must have at least 8 GB free space in partition where you want to store this hard disk. Click on create
virtual machine hard disk file location
Wait till it creates new virtual hard disk in selected folder.
virtual machine hard disk creating
In few minutes wizard would create new virtual machine and redirect back you to main software screen. Click on Ubuntu (Or whatever name you have given to virtual machine) from left panel.
virtual box main screen with os
We do not have any operating system installed in virtual machine so it would prompt us to install OS. Click on folder icon to browse
virtual box select start up disk
Select IOS image of Ubuntu
virtual box select os image
click on start to begun installation process
virtual box selected os
If its your first virtual machine wizard will popup information message for mouse pointer integration. Check mark on Do not show this message again and click on ok.
virtual box mouse message
Repeat same for bit information message. Check mark on Do not show this message again and click on ok.
virtual box bit message
We are on first screen of installation process.
ubuntu installation install ubuntu
From here you can install Ubuntu. For installation steps of Ubuntu check our article

How to make windows XP bootable disk

In this article we would create a window XP bootable disk from copied files. This is very useful when you have copied files of XP. To keep backup we generally copy the entire disk on hard disk. But you could not create a bootable disk from these files. To make a bootable XP disk from copied files we need to add boot files with image on CD.
The following items are required:
  • A copy of the original Windows CD/DVD.
  • A copy of the Boot Files Download from here.
  • A minimum of 1GB available hard disk space for CD's.
  • A minimum of 5GB available hard disk space for DVD's.
Extract the zip file
xp bootable cd
This zip file contain all required boot files
xp bootable image files
Create a folder named xpcd on c:\ drive and copy all the files and folder of windows XP cd in it

Now start your CD burning software I have used NERO for it
nero cd burning software
Select new options from files menu then choose CD-ROM(BOOT)
In right pane do following settings
  • Select boot tab
  • Select Image file from Source of boot image data
  • Click on Browse and choose boot.ima ( where you have extract image files)
  • Check Enable expert settings (for advanced users only!).
  • Set Kind of emulation: to No Emulation.
  • Set Load segment of sectors (hex!): to 0000.
  • Set Number of loaded sectors: to 4.
windows xp bootable cd

Click on the ISO tab.

  • Set File name length to Max. of 31 chars (ISO Level 2).
  • Set Format to Mode 1.
  • Set Character Set to ISO 9660 (standard ISO CD-ROM).
  • Check the Joliet check box.
  • Check all Relax ISO Restrictions.
  • Check Allow more than 64 characters for Joliet names.
windows xp bootable cd iso

Click on the Label tab.

  • IN ISO 9660 text field Enter volume lable
  • IN Joliet text boxes. Enter system identifier label
windows xp bootable lable tab

Click the Burn tab.

  • Check Write.
  • Check Finalize CD (No further writing possible!).
  • Set Write Method to Disc-at-once. (We have had Track-At-Once work as well.)

Click the New button

Locate the folder C:\xpcd ( OR where you have copied xp cd)
Select everything from the folder and drag it to the ISO compilation panel.
and Click the burn CD Dialog button
bootable cd all xp files
Verify the settings. Correct if needed.
Click the Burn button.
This will launch CD burning wizard

Click the OK button

Congratulations you have successfully created windows xp bootable cd.
Now you can use this window XP bootable cd for installation.